KUFF2000 Clamp On Ultrasonic Flow Meter Main Unit And Sensor Fixed On Pipe

KUF2000 Series Clamp On Ultrasonic Flow Meter

Introduction
KUF2000 series clamp on ultrasonic flow meter consists of the meter and clamp on sensor.
The clamp on ultrasonic flow meter is easy for installation, no need to cut off the pipe and water, no press loss. It support measuring online long-term. Wide range of liquid flow can be measured with the sensor clamped on the pipe.

Both the main unit and sensor of the KUFF2000 flow meter are fixed on the pipe. Default is IP65, IP68 is optional.

Clamp on sensors are installed on the pipe. Suitable for pipe sizes from DN32mm to DN6000mm.

Feature

High Accuracy 1%
Wide measuring range
Several types transducer for selection, pipe size from Dn32 to Dn1600
High Reliability
Adopt low voltage, multi-pulse technology to improve accuracy, operation life and reliability.
Strong Anti-interference
Dual-balance signal differential receiver/driver circuit to avoid interference of converter, TV tower, high voltage line etc.
Powerful Recording Function
Automatically record the following data:
1. The totalizer data of the last 512 days/128 months/10 years
2. The time and corresponding flow rate of the last 6 4 times of power on and off events
3. The working status of the last 32 days
Support Heat Measurement
Connect the temperature transducer ,can finish the heat/energy measurement

Working Condition

Basic Parameters

Dimension

• Built-in magnet, easy to be absorbed on pipe
• IP68
• Measuring range: DN32~DN6000
• Temperature range: - 30~90℃

• Built-in magnet, easy to be absorbed on pipe
• IP68
• Measuring range: DN32~DN6000
• Temperature range: - 30~160℃

Mounting Bracket Clamp On Sensor

• Improve installation efficiency and accuracy
• IP68
• Measuring range: DN32~DN700
• Temperature range: - 40~160℃

Ordering Information