Target Gas: Combustibles (i-CH410 Or CH4 Calibration) Oxygen
Detection Principle: Non-Dispersive Infrared (IR)
Communication Interface: RS - 232; RS - 485; USB
Power Input: 220VAC ± 22V
Accuracy: 2% Of FS
Connection Location: One Pair Side And One Pair Back
Wideo
Medium: strong corrosive liquid, steam, foam
Measuring range: 0.1m~10/20/30/60/100m
Measured Components: CO/CO₂/CH₄/H₂/O₂/C₂H₂/C₂H₄/CₙHₘ/Calorific Value
Measurement Principle: CO/CO₂/CH₄/C₂H₂/C₂H₄/CₙHₘ: NDIR; H₂: TCD; O₂: ECD
Data Refresh: ≤1s
Output Method: CAN2.0
Communication: RS - 485/RS - 232, can be connected to Gasboard series smoke analysis equipment
Power Supply: 100 - 240VAC, 80W
Model: XP-3180
Gas Detected: Oxygen
Measured Components: H₂S, O₂, CO, CO₂, CH₄
Measurement Principle: TDLAS
Applicable Media: Non - combustible gases such as air, flue gas, etc.
Applicable Pipeline Diameter: ≥ 0.5m
Applicable Engine Range: Engines of any size, at any speed, and with exhaust pipes of various specifications
Sampling Flow Measurement Accuracy: ≤ ±4% (Dilution ratio ≤ 15:1)
Measurement range detection range: 100mm - 3000mm
Pressure bearing: 0 - 1Mpa
Supply voltage (VDC): 9~36V (test voltage: 12V)
Supply current (mA): <30
Detection Principle: Non - Dispersive Infrared (NDIR) Detection Technology
Detected Gas Types: Electrolyte vapors such as DMC, EMC, EC
Detected Gases: PM2.5, CO₂
Technical Principle: PM2.5: Laser scattering；CO₂: Single - light - source NDIR, dual - channel
Wyślij do nas zapytanie
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
